Features · Work with it
The Workbench
A whiskey isn't finished when it leaves the barrel. Before it reaches a bottle, somebody still has to decide what it gets mixed with, and sometimes whether it goes back onto wood for one more layer of flavor.
Mixing, topping up a blend that never runs dry, and finishing on wood are three of the oldest jobs in the trade. All three also work at home, on a shelf of open bottles.
Most whiskey is a blend
Unless the label says single barrel, the whiskey in a bottle came from many barrels. No two barrels taste alike, so a distillery pulls a group of them and mingles them until the result tastes the way that whiskey is supposed to taste. Blending isn't a shortcut. It is how most whiskey is made, and choosing which barrels go in, and how much of each, is one of the most skilled jobs in the building.
Two open bottles on a shelf are no different. Each one is a set of flavors at a certain strength, and the question is what they make together.
What happens when two whiskeys meet
Proof is the easy part. A blend lands between the whiskeys that went into it, pulled toward whichever one there is more of. Equal parts of a 90 proof and a 120 proof come out near 105. Heat follows the proof, so a hot bottle cut with a gentle one drinks cooler than it did alone.
Most flavors behave the same way. A sweet whiskey and a dry one meet in the middle, and changing the proportions slides the result one way or the other. That is why proportions matter so much. Two parts to one is a different whiskey from one part to two.
A few flavors refuse to follow that rule. Smoke carries: a peated whiskey that makes up a tenth of the glass tastes like far more than a tenth, and peat shows through almost any amount of dilution. Earthy, funky notes hold on in the same way, covering what is around them instead of thinning out. Body leans toward the heavier whiskey, and the longer finish of the two lasts a little further than its share would suggest.
The loud flavors also hide the quiet ones. A delicate floral note that was easy to find on its own can disappear under smoke or heavy oak, even though it is still in the glass.
Then there is time. A blend tastes drier the day it is mixed, with the oak standing out more than it should. Give it about a month and it settles. Distillers call that marrying, and it is why a blend is worth tasting twice.
A bottle that never ends
An infinity bottle is a blend that never gets finished. Pour a glass from it, top it up with something else, and keep going for years. Sherry makers have worked this way for a very long time, drawing from a cask and refilling it with younger wine, in a system called a solera.
The arithmetic behind it is simple. Every pour takes a little of everything in the bottle, in the same proportion. Every addition then shifts the balance toward whatever just went in. How far it shifts depends on how full the bottle is: two ounces into a full bottle barely moves it, and two ounces into a bottle that is nearly empty takes it over.
That also means nothing ever fully leaves. The first whiskey that went in is still there years later, at a smaller and smaller share. An infinity bottle doesn't have one flavor. It has a history, and it tastes a little different after every chapter.
It is still an open bottle, and air works on it like any other. Topping it up helps, because how full a bottle is matters most.
Wood keeps working
The third job is the oldest one. In a barrel, whiskey pulls color, sweetness, spice and tannin out of the wood. Put a piece of wood into a bottle of whiskey and the same thing happens again.
It happens faster, too. A barrel holds a lot of whiskey for the amount of wood touching it. A stave, a spiral or a few cubes in a single bottle turn that around, so a change that takes years in a warehouse shows up in days and weeks.
What the wood adds depends on the tree. American oak leans toward vanilla and sweetness. French oak brings more spice and more tannin. Cherry and apple push toward fruit, maple toward sweetness, hickory toward smoke. Amburana is the loud one, heavy with spice and quick to take over.
Toast and char matter just as they do in a barrel, and they give up most of what they have in the first month. The amount of wood decides how far the flavor goes. And because a small bottle moves quickly, it can go too far: leave the wood in too long and the tannin takes over, drying and bitter. The wood can come out at any time, but what it has already given the whiskey stays there. So the rule is to taste it every week.
What you can do with it
Whiskey Richard puts all three on one tab, the Workbench:
- Build a blend before you pour it. Put up to four bottles on the bench, from your collection or the catalog, and set how many parts of each. The flavor wheel and the proof change as you move the proportions, and the bench tells you when one bottle will carry further than its share.
- Start from a recipe. Pick a ready-made blend, or see which styles the bottles already in your collection can make.
- Pour it and compare. Pour the blend and the app takes each bottle's share from your collection, asking first before it opens a sealed one. Then rate what you poured. Your glass sits next to the prediction, with the flavors that landed and the ones that differed.
- Keep changing it. Adjust the recipe and save it as the next version, with every earlier version still there. Share a blend with a link.
- Keep an infinity bottle. Name it, say how much it holds, and log every addition and every pour. The app keeps the count: what is in the bottle right now, each whiskey's share, the predicted proof and the flavor wheel.
- See the next addition before you make it. Pick a bottle and an amount, and the app shows how much of the mix it will be and which flavors it nudges up or down.
- Walk back through its history. Step through the timeline and see the bottle as it was after each addition.
- Put wood in a bottle. Choose the whiskey, then the wood: twelve of them, from American oak and mizunara to cherry, maple and hickory, with the toast, the char, the form and the amount. Use up to four woods in one bottle.
- Watch where the flavor is heading. The wheel predicts the whiskey at day one, two weeks and two months, drawn over a dashed outline of the whiskey as it went in.
- Taste, pull, finish. Log a taste each week, pull a pour, change the woods, and finish it when it's where you want it. It goes into your collection as its own bottle, ready to rate and pour.
Want more? Read "Toast × char" in the app's Learn library.